Printing of MF S50 NFC Sticker includes CMYK, RGB, Pantone. All the products could be customized. Our services will never end even after you receive the products.
Applications of the MF S50 NFC Sticker include Public Transport, subway tickets, bus RFID ticket, access control, identity authentication, payment, product marking etc.
Our Inlay are covered in the surface material to form the final label. These are some materials: 1. Coated Paper: Low cost, easy to print on. 2. PET: Waterproof, heatproof, environmental protection. 3. PVC: Waterproof, corrosion resistance, high-temperature resistance. 4. Normal Double-sided adhesive: Robust, widely used, and cheaper than 3M Glue. 5. 3M Glue: Higher cost but strong viscosity, good temperature tolerance & anti-corrosion. 6. Electrostatic adhesive:Electrostatic prevention, high temperature resistance, strong water resistance
For die-cutting the minimum size should be 4mm bigger than inlay normally.
Material
Soft PVC with Sticker
Size
35 X 35mm
Chip
MF S50
Printing Options
Full color offset printing, Silk-screen printing, etc.
Surfaces
Frosted, Glossy, Matte Finishing
Crafts Available
Barcode, Scratch off panel, Signature panel, Spray number, Laser number, Embossing, etc.
Shipping Details
Generally, 3 days for DHL/FedEx/UPS, 10 days for air shipping, 18 days for sea shipping.
Payment Terms
TT,PayPal, WESTUNION, L/C
Common Chip Types
Protocol
Capacity
Anti-collision
Function
Available 125KHz Chip
TK4100
/
64 bit
No
Read Only
EM4200
128 bit
EM4305
T5577
330 bits
Read/Write
Available 13.56MHz Chip
NTAG® 213
ISO14443A
180 byte
NTAG® 215
540 byte
NTAG® 216
924 byte
MIFARE® Classic® 1K
1 KB
MIFARE® Classic® 4K
4 KB
MIFARE® Plus® S 1K
2 KB/4 KB
MIFARE Ultralight® EV1
48 byte
MIFARE Ultralight® C
144 byte
ICODE® SLIX
ISO15693
896 bit
Yes
Available 860-960MHz Chip
Alien H3
ISO18000-6C
512 bit
Other chips are also available.
NTAG are registered trademarks of NXP B.V. and are used under license.ICODE are registered trademarks of NXP B.V. and are used under license.MIFARE and MIFARE Classic are trademarks of NXP B.V.MIFARE and MIFARE Ultralight are registered trademarks of NXP B.V. and are used under license.MIFARE and MIFARE Plus are registered trademarks of NXP B.V. andare used under license.
Weight About 2KG for 1000 pcs
Carton Size 49*23*20 cm 49*23*26 cm Special demands for packing available.
Available Applications: virtually on any surface, metal,plastic,wood,paper,used for animals tracking, library management,mobile phone payment, anti-fake wine management, etc.
THey work as designed, i'm really enjoying setting these things up. Note the stickers are only writable once, at least that i've found. I used the keychain tag as my trigger for car mode, pretty slick little stickers. Fast shipping too!
Works with Nexus 4/5/7 devices. Haven't found a use for them all yet, but I'm sure I will over time.
A good nfc taga with excellent adhesive and easy to program I use the nfc smart q to program it to night and work and car mod . I even gave some of it to my friends as a gift.
Works as advertised. Comes particularly handy at work where I need to switch profiles to accomodate an office environment."
Work as intended, and the Keychain tag is spectacular.
I-CODE 2 Tag Descriptions: With a wide selection of antenna choices and protocols, the I-CODE 2..
NTAG203/213/216 Adhesive NFC Paper Sticker Descriptions: NTAG203/213/216 Adhesive NFC Paper Sti..
You can program a NFC Tag to auto start an app. So, slide your phone into Google cardboard, pho..
Our Inlay are covered in the surface material to form the final label. These are some materials: ..